Technical data for design verification
|
|
|
|
Rated operational current for specified heat dissipation
|
In
|
A
|
7
|
Heat dissipation per pole, current-dependent
|
Pvid
|
W
|
0.1
|
Equipment heat dissipation, current-dependent
|
Pvid
|
W
|
0
|
Static heat dissipation, non-current-dependent
|
Pvs
|
W
|
1.4
|
Heat dissipation capacity
|
Pdiss
|
W
|
0
|
Operating ambient temperature min.
|
|
°C
|
-25
|
Operating ambient temperature max.
|
|
°C
|
60
|
IEC/EN 61439 design verification
|
|
|
|
10.2 Strength of materials and parts
|
|
|
|
10.2.2 Corrosion resistance
|
|
|
Meets the product standard's requirements.
|
10.2.3.1 Verification of thermal stability of enclosures
|
|
|
Meets the product standard's requirements.
|
10.2.3.2 Verification of resistance of insulating materials to normal heat
|
|
|
Meets the product standard's requirements.
|
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
|
|
|
Meets the product standard's requirements.
|
10.2.4 Resistance to ultra-violet (UV) radiation
|
|
|
Meets the product standard's requirements.
|
10.2.5 Lifting
|
|
|
Does not apply, since the entire switchgear needs to be evaluated.
|
10.2.6 Mechanical impact
|
|
|
Does not apply, since the entire switchgear needs to be evaluated.
|
10.2.7 Inscriptions
|
|
|
Meets the product standard's requirements.
|
10.3 Degree of protection of ASSEMBLIES
|
|
|
Does not apply, since the entire switchgear needs to be evaluated.
|
10.4 Clearances and creepage distances
|
|
|
Meets the product standard's requirements.
|
10.5 Protection against electric shock
|
|
|
Does not apply, since the entire switchgear needs to be evaluated.
|
10.6 Incorporation of switching devices and components
|
|
|
Does not apply, since the entire switchgear needs to be evaluated.
|
10.7 Internal electrical circuits and connections
|
|
|
Is the panel builder's responsibility.
|
10.8 Connections for external conductors
|
|
|
Is the panel builder's responsibility.
|
10.9 Insulation properties
|
|
|
|
10.9.2 Power-frequency electric strength
|
|
|
Is the panel builder's responsibility.
|
10.9.3 Impulse withstand voltage
|
|
|
Is the panel builder's responsibility.
|
10.9.4 Testing of enclosures made of insulating material
|
|
|
Is the panel builder's responsibility.
|
10.10 Temperature rise
|
|
|
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
10.11 Short-circuit rating
|
|
|
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
10.12 Electromagnetic compatibility
|
|
|
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
10.13 Mechanical function
|
|
|
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|